rizer XQ2 Vaporiser

The Arizer XQ2 is a mains-powered desktop vaporiser for dry herbs. You can draw through the supplied whip or use its fan to fill a balloon. Both setups come in the box, along with a remote control and two glass herb bowls.

It suits a space where the vaporiser can stay plugged in and ready for longer sessions. The XQ2 gives you precise heat control and several ways to adjust the experience, although its glass parts and setup need more room than a pocket vaporiser.

Choose a whip or a balloon

The whip connects to the glass bowl through an elbow adaptor. Draw through it at your own pace, or switch on the fan for an assisted draw. Its silicone tube measures approximately 90 cm, giving you room to sit back from the device.

For a balloon session, connect the short glass whip and balloon parts, then use the fan to fill a bag. Once it is full, remove it and fit the cap. You can take the balloon away from the unit or share it without moving the XQ2. Two balloon bags come in the standard package.

Ceramic convection heating

The XQ2 heats air with a ceramic element and passes that air through the herbs in its glass bowl. You can set the temperature from 50 °C to 260 °C in 1 °C steps.

Allow around two minutes for the unit to reach its setting. The glass bowl can take a further three to five minutes to warm fully, especially from a cold start. That short wait helps the session settle before you judge the temperature or change the fan speed.

Two glass bowls with different loading options

Arizer includes two Glass Connoisseur Bowls. Their design gives you a choice of how close the herbs sit to the heater. Try a smaller load when you want a shorter session, or use the other bowl position when you need more space.

The bowls sit on the heater with a glass connection. A Tuff BowlGrip fits around each bowl to help you handle it, but the glass can still become hot during use. Let it cool before you empty or clean it.

Controls on the unit and the remote

Use the five buttons beside the XQ2 display to set the temperature, start the fan and adjust session options. The remote offers the same everyday controls from across the room, including three temperature presets. Their default settings are 170 °C, 185 °C and 200 °C, and you can customise them.

The XQ2 also offers a temperature alert, a delayed start and a shut-off timer. A coloured light ring around the base indicates the device’s status; you can choose from several light settings.

Three fan speeds and a replaceable intake filter

The fan has three speeds. A lower speed gives you more time to fill a balloon, while a higher speed fills it faster. You can also use the fan with the whip when you prefer an assisted draw.

Air enters through a replaceable filter cartridge. Check the filter during routine cleaning and replace it when it becomes dirty or worn.

Arizer XQ2 specifications

What’s in the box?

• Arizer XQ2 vaporiser
• Power adaptor and cord
• Remote control
• Two Glass Connoisseur Bowls and two Tuff BowlGrips
• Silicone whip with glass fittings
• Glass Mini Whip
• Frosted glass balloon mouthpiece and balloon connector
• Two balloon bags and a balloon cap
• Air intake filter cartridge
• Flat and dome screens
• Glass aroma diffusion dish
• Stainless steel stirring tool
• Owner’s manual

Arizer also lists a sample of aromatic botanicals in its standard package. Box contents may differ by retailer or bundle, so check the seller’s listing before you order.

How to use the Arizer XQ2

1. Place the XQ2 on a stable, heat-resistant surface and connect its power adaptor.
2. Loosely fill a Glass Connoisseur Bowl with suitable dry herbs.
3. Seat the bowl on the heater and attach either the whip or the balloon filling parts.
4. Switch on the device and choose a temperature. Give the heater and glass bowl time to warm.
5. For the whip, draw through the mouthpiece or turn on the fan for assistance. For a balloon, run the fan until the bag reaches the desired fill.
6. Switch off the XQ2 after the session. Let the glass cool before you remove and empty it.

Cleaning and care

Brush loose herbs from the bowls and screens after the glass has cooled. Clean the removable glass parts when residue builds up, then let them dry completely before reassembly. Check the whip tubing and balloon parts for wear, and replace the intake filter as needed.

Keep liquids out of the electrical base. Arizer also advises a first-use heat cycle in its support instructions; read those instructions before your first session.

Frequently asked questions

Does the Arizer XQ2 include both a whip and balloons?

Yes. The standard package includes a silicone whip, two balloon bags and the fittings needed for each setup.

Does the XQ2 run on a battery?

No. It is a desktop model that uses a mains power adaptor. Check that the seller supplies the correct plug for your country.

Can I control it without getting up?

Yes. A remote control comes in the box and includes three customisable temperature presets.

Is the XQ2 suitable for e-liquids or tobacco?

No. Arizer states that the XQ2 is not for e-liquids, tobacco or tobacco products. Its intended uses include dry herbs and aroma diffusion with the appropriate accessories.

What warranty applies?

Arizer lists a limited three-year warranty for defects in materials or workmanship and a lifetime warranty on the heating element. Glass parts are not covered. Keep your proof of purchase and check the seller’s terms before ordering.

Explore the Arizer XQ2

The XQ2 gives you two delivery methods in one desktop setup. Choose the whip for a direct draw or fill a balloon when you want to move away from the unit. Before you buy, confirm the plug type, package contents and warranty offered for your order.